После заливки дистрибутива Drupal (сборка Commons) не смог начать установку из-за 403 ошибки "You don't have permission to access /commons/ on this server" На эти грабли я уже наступал, но не смог вспомнить решение. Проблема решается # chcon -R -t httpd_sys_content_t commons См. последний фрейм от Fedora
Сначала о правах пользователя. В Linux есть владелец процесса, группа процеса и все остальные. В книге Д. Колесниченко Linux на ноутбуке"в гл.23 все изложено довольно подробно. Через меню Wiki Linux можно найти соответсвующие описания. А здесь остановимся на местах хранения файлов.
При добавлении нового пользователя создается запись в файле etc/passwd, сами пароли записываются в файле etc/shadow (зашифрованные), каждый пользователь влючен по умолчанию в одну группу (см. файл etc/groups). Все файлы эти файлы из моего ноутбука приведены внизу в комментариях. [root@localhost html]# ls -Z
drwxr-xr-x 6226 6226 root:object_r:user_home_t commons
drwxr-xr-x 6226 6226 root:object_r:httpd_sys_content_t drupal-7.9 [root@localhost html]# chcon -R -t httpd_sys_content_t commons
[root@localhost html]# ls -Z
drwxr-xr-x 6226 6226 root:object_r:httpd_sys_content_t commons
drwxr-xr-x 6226 6226 root:object_r:httpd_sys_content_t drupal-7.9 После прочтения 5.7. Контексты SELinux - Маркирование файлов выполнил комманду изменения контекста (см. в блоке кода). Оказалось, что проблема была именно в SELinux.
Ссылки раздела меню SELinux описывают все аспекты сервиса..., примеры комманд приведены в комментариях.
Похожие посты внизу.
etc/passwd
ОтветитьУдалитьroot:x:0:0:root:/root:/bin/bash
bin:x:1:1:bin:/bin:/sbin/nologin
daemon:x:2:2:daemon:/sbin:/sbin/nologin
adm:x:3:4:adm:/var/adm:/sbin/nologin
lp:x:4:7:lp:/var/spool/lpd:/sbin/nologin
sync:x:5:0:sync:/sbin:/bin/sync
shutdown:x:6:0:shutdown:/sbin:/sbin/shutdown
halt:x:7:0:halt:/sbin:/sbin/halt
mail:x:8:12:mail:/var/spool/mail:/sbin/nologin
news:x:9:13:news:/etc/news:
uucp:x:10:14:uucp:/var/spool/uucp:/sbin/nologin
operator:x:11:0:operator:/root:/sbin/nologin
games:x:12:100:games:/usr/games:/sbin/nologin
gopher:x:13:30:gopher:/var/gopher:/sbin/nologin
ftp:x:14:50:FTP User:/var/ftp:/sbin/nologin
nobody:x:99:99:Nobody:/:/sbin/nologin
nscd:x:28:28:NSCD Daemon:/:/sbin/nologin
distcache:x:94:94:Distcache:/:/sbin/nologin
vcsa:x:69:69:virtual console memory owner:/dev:/sbin/nologin
pcap:x:77:77::/var/arpwatch:/sbin/nologin
ntp:x:38:38::/etc/ntp:/sbin/nologin
apache:x:48:48:Apache:/var/www:/sbin/nologin
rpc:x:32:32:Portmapper RPC user:/:/sbin/nologin
rpcuser:x:29:29:RPC Service User:/var/lib/nfs:/sbin/nologin
nfsnobody:x:65534:65534:Anonymous NFS User:/var/lib/nfs:/sbin/nologin
mailnull:x:47:47::/var/spool/mqueue:/sbin/nologin
smmsp:x:51:51::/var/spool/mqueue:/sbin/nologin
sshd:x:74:74:Privilege-separated SSH:/var/empty/sshd:/sbin/nologin
webalizer:x:67:67:Webalizer:/var/www/usage:/sbin/nologin
dovecot:x:97:97:dovecot:/usr/libexec/dovecot:/sbin/nologin
squid:x:23:23::/var/spool/squid:/sbin/nologin
xfs:x:43:43:X Font Server:/etc/X11/fs:/sbin/nologin
hsqldb:x:96:96::/var/lib/hsqldb:/sbin/nologin
named:x:25:25:Named:/var/named:/sbin/nologin
dbus:x:81:81:System message bus:/:/sbin/nologin
avahi:x:70:70:Avahi daemon:/:/sbin/nologin
haldaemon:x:68:68:HAL daemon:/:/sbin/nologin
avahi-autoipd:x:100:101:avahi-autoipd:/var/lib/avahi-autoipd:/sbin/nologin
gdm:x:42:42::/var/gdm:/sbin/nologin
Altersego:x:500:500:Altersego :/home/Altersego:/bin/bash
mysql:x:27:27:MySQL Server:/var/lib/mysql:/bin/bash
Формат строки файла etc/passwd
Удалитьlogin:password:UID:GID:настоящее имя(ФИО):домашний каталог:/bin/bash (интерпретптор комманд)
UID - User ID
GID - Group ID
вместо пароля обычно /x/, поскольку в новых дистрибутивах пароль содержится в файле
etc/shadow (редактируется тольо root)
если строки начинаются с
не с $ - то алгоритм шифрования DES (старые дистрибутивы),
с $1$ - то алгоритм шифрования MD5,
с $2a$- то алгоритм шифрования Blowfish,
содержание etc/shadow
Удалитьroot:$1$.6lNNzsU$a4oqagiS75X2HLUipZe5Q/:14438:0:99999:7:::
bin:*:14438:0:99999:7:::
daemon:*:14438:0:99999:7:::
adm:*:14438:0:99999:7:::
lp:*:14438:0:99999:7:::
sync:*:14438:0:99999:7:::
shutdown:*:14438:0:99999:7:::
halt:*:14438:0:99999:7:::
mail:*:14438:0:99999:7:::
news:*:14438:0:99999:7:::
uucp:*:14438:0:99999:7:::
operator:*:14438:0:99999:7:::
games:*:14438:0:99999:7:::
gopher:*:14438:0:99999:7:::
ftp:*:14438:0:99999:7:::
nobody:*:14438:0:99999:7:::
nscd:!!:14438:0:99999:7:::
distcache:!!:14438:0:99999:7:::
vcsa:!!:14438:0:99999:7:::
pcap:!!:14438:0:99999:7:::
ntp:!!:14438:0:99999:7:::
apache:!!:14438:0:99999:7:::
rpc:!!:14438:0:99999:7:::
rpcuser:!!:14438:0:99999:7:::
nfsnobody:!!:14438:0:99999:7:::
mailnull:!!:14438:0:99999:7:::
smmsp:!!:14438:0:99999:7:::
sshd:!!:14438:0:99999:7:::
webalizer:!!:14438:0:99999:7:::
dovecot:!!:14438:0:99999:7:::
squid:!!:14438:0:99999:7:::
xfs:!!:14438:0:99999:7:::
hsqldb:!!:14438:0:99999:7:::
named:!!:14438:0:99999:7:::
dbus:!!:14438:0:99999:7:::
avahi:!!:14438:0:99999:7:::
haldaemon:!!:14438:0:99999:7:::
avahi-autoipd:!!:14438:0:99999:7:::
gdm:!!:14438:0:99999:7:::
Altersego:$1$chmRBc2v$dKQmf2.dwVRAO8IoAvBVy0:14947:0:99999:7:::
mysql:!!:14438::::::
etc/groups
Удалитьroot:x:0:root,Altersego
bin:x:1:root,bin,daemon
daemon:x:2:root,bin,daemon
sys:x:3:root,bin,adm
adm:x:4:root,adm,daemon
tty:x:5:
disk:x:6:root
lp:x:7:daemon,lp
mem:x:8:
kmem:x:9:
wheel:x:10:root
mail:x:12:mail
news:x:13:news
uucp:x:14:uucp
man:x:15:
games:x:20:
gopher:x:30:
dip:x:40:
ftp:x:50:
lock:x:54:
nobody:x:99:
users:x:100:
nscd:x:28:
utmp:x:22:
utempter:x:35:
distcache:x:94:
floppy:x:19:
vcsa:x:69:
pcap:x:77:
slocate:x:21:
ntp:x:38:
apache:x:48:
rpc:x:32:
rpcuser:x:29:
nfsnobody:x:65534:
mailnull:x:47:
smmsp:x:51:
sshd:x:74:
webalizer:x:67:
dovecot:x:97:
squid:x:23:
xfs:x:43:
hsqldb:x:96:
named:x:25:
dbus:x:81:
avahi:x:70:
haldaemon:x:68:
avahi-autoipd:x:101:
gdm:x:42:
Altersego:x:500:
mysql:x:27:
audio:x:63:gdm
ecryptfs:x:102:
fuse:x:103:
свойства папки дистрибутива commons, к которой нет доступа:
ОтветитьУдалитьvar/www/html/commons
owner 6226 (как и других работающих дистрибутивов)
octal permissions 1600755....
Единственное отличие:+
SElinux context - Temporary data tmp_t:s0
"...вы можете войти как root в текстовом режиме,но ене можете в графическом,,, стр. 330)
если вы хотитет входить, как root в графическом режиме, откройте терминал (su)
# - признак того, что вы работаете с правами суперпользователя (а не $)
#setfiles /etc/security/selenux/file_contexts /root
[root@localhost ~]# setfiles /?
Удалитьusage: setfiles [-dnpqvW] [-o filename] [-r alt_root_path ] spec_file pathname...
usage: setfiles -c policyfile spec_file
usage: setfiles -s [-dnqvW] [-o filename ] spec_file
[root@localhost ~]#
man CHECKPOLICY
ОтветитьУдалитьNAME
checkpolicy - SELinux policy compiler
SYNOPSIS
checkpolicy [-b] [-d] [-M] [-U handle_unknown ] [-V] [-c policyvers] [-o out-
put_file] [input_file]
DESCRIPTION
This manual page describes the checkpolicy command.
checkpolicy is a program that checks and compiles a SELinux security policy con-
figuration into a binary representation that can be loaded into the kernel. If no
input file name is specified, checkpolicy will attempt to read from policy.conf or
policy, depending on whether the -b flag is specified.
OPTIONS
-b Read an existing binary policy file rather than a source policy.conf file.
-d Enter debug mode after loading the policy.
-M Enable the MLS policy when checking and compiling the policy.
-o filename
Write a binary policy file to the specified filename.
-c policyvers
Specify the policy version, defaults to the latest.
-U OPTION
Tells the kernel how to handle unknown classes and permissions, where
OPTION is one of the following:
deny Deny unknown kernel checks
Удалитьreject Reject loading of policy with unknowns
allow Allow unknown kernel checks
-V Show policy versions created by this program
SEE ALSO
SELinux documentation at http://www.nsa.gov/selinux, especially "Configuring the
SELinux Policy".
AUTHOR
This manual page was written by Arpad Magosanyi , and
edited by Stephen Smalley . The program was written by
Stephen Smalley .
CHECKPOLICY(8)
Для модифицирования учетной записи ее обладатель или суперпользователь могут применить комманду usermod
ОтветитьУдалитьman usermod
NAME
usermod - modify a user account
SYNOPSIS
usermod [options] LOGIN
DESCRIPTION
The usermod command modifies the system account files to reflect the changes that are
specified on the command line.
OPTIONS
The options which apply to the usermod command are:
-a, --append
Add the user to the supplemental group(s). Use only with -G option.
-c, --comment COMMENT
The new value of the user’s password file comment field. It is normally modified
using the chfn(1) utility.
-d, --home HOME_DIR
The user’s new login directory. If the -m option is given the contents of the
current home directory will be moved to the new home directory, which is created if
it does not already exist.
-e, --expiredate EXPIRE_DATE
The date on which the user account will be disabled. The date is specified in the
format YYYY-MM-DD.
-f, --inactive INACTIVE
The number of days after a password expires until the account is permanently
disabled. A value of 0 disables the account as soon as the password has expired, and
a value of -1 disables the feature. The default value is -1.
-g, --gid GROUP
The group name or number of the user’s new initial login group. The group name must
exist. A group number must refer to an already existing group. The default group
:
NAME
Удалитьusermod - modify a user account
SYNOPSIS
usermod [options] LOGIN
DESCRIPTION
The usermod command modifies the system account files to reflect the changes that are
specified on the command line.
OPTIONS
The options which apply to the usermod command are:
-a, --append
Add the user to the supplemental group(s). Use only with -G option.
-c, --comment COMMENT
The new value of the user’s password file comment field. It is normally modified
using the chfn(1) utility.
-d, --home HOME_DIR
The user’s new login directory. If the -m option is given the contents of the
current home directory will be moved to the new home directory, which is created if
it does not already exist.
-e, --expiredate EXPIRE_DATE
The date on which the user account will be disabled. The date is specified in the
format YYYY-MM-DD.
-f, --inactive INACTIVE
The number of days after a password expires until the account is permanently
disabled. A value of 0 disables the account as soon as the password has expired, and
a value of -1 disables the feature. The default value is -1.
-g, --gid GROUP
The group name or number of the user’s new initial login group. The group name must
exist. A group number must refer to an already existing group. The default group
:
NAME
Удалитьusermod - modify a user account
SYNOPSIS
usermod [options] LOGIN
DESCRIPTION
The usermod command modifies the system account files to reflect the changes that are
specified on the command line.
OPTIONS
The options which apply to the usermod command are:
-a, --append
Add the user to the supplemental group(s). Use only with -G option.
-c, --comment COMMENT
The new value of the user’s password file comment field. It is normally modified
using the chfn(1) utility.
-d, --home HOME_DIR
The user’s new login directory. If the -m option is given the contents of the
current home directory will be moved to the new home directory, which is created if
it does not already exist.
-e, --expiredate EXPIRE_DATE
The date on which the user account will be disabled. The date is specified in the
format YYYY-MM-DD.
-f, --inactive INACTIVE
The number of days after a password expires until the account is permanently
disabled. A value of 0 disables the account as soon as the password has expired, and
a value of -1 disables the feature. The default value is -1.
-g, --gid GROUP
The group name or number of the user’s new initial login group. The group name must
exist. A group number must refer to an already existing group. The default group
:
-Z, --selinux-user SEUSER
УдалитьThe SELinux user for the user’s login. The default is to leave this field blank,
which causes the system to select the default SELinux user.
CAVEATS
usermod will not allow you to change the name of a user who is logged in. You must make
certain that the named user is not executing any processes when this command is being
executed if the user’s numerical user ID is being changed. You must change the owner of
any crontab files manually. You must change the owner of any at jobs manually. You must
make any changes involving NIS on the NIS server.
FILES
/etc/group
Group account information.
/etc/passwd
User account information.
/etc/shadow
Secure user account information.
SEE ALSO
chfn(1), chsh(1), passwd(1), crypt(3), gpasswd(8), groupadd(8), groupdel(8),
groupmod(8), login.defs(5), useradd(8), userdel(8).
System Management Commands 06/24/2006 USERMOD(8)
man chown
ОтветитьУдалитьchown - change file owner and group
SYNOPSIS
chown [OPTION]... [OWNER][:[GROUP]] FILE...
chown [OPTION]... --reference=RFILE FILE...
DESCRIPTION
This manual page documents the GNU version of chown. chown changes the user and/or
group ownership of each given file. If only an owner (a user name or numeric user ID)
is given, that user is made the owner of each given file, and the files’ group is not
changed. If the owner is followed by a colon and a group name (or numeric group ID),
with no spaces between them, the group ownership of the files is changed as well. If a
colon but no group name follows the user name, that user is made the owner of the files
and the group of the files is changed to that user’s login group. If the colon and
group are given, but the owner is omitted, only the group of the files is changed; in
this case, chown performs the same function as chgrp. If only a colon is given, or if
the entire operand is empty, neither the owner nor the group is changed.
OPTIONS
Change the owner and/or group of each FILE to OWNER and/or GROUP. With --reference,
change the owner and group of each FILE to those of RFILE.
-c, --changes
like verbose but report only when a change is made
--dereference
affect the referent of each symbolic link, rather than the symbolic link itself
(this is the default)
-h, --no-dereference
affect each symbolic link instead of any referenced file (useful only on systems
that can change the ownership of a symlink)
--from=CURRENT_OWNER:CURRENT_GROUP
change the owner and/or group of each file only if its current owner and/or
group match those specified here. Either may be omitted, in which case a match
CHOWN(1)
УдалитьNAME
chown - change file owner and group
SYNOPSIS
chown [OPTION]... [OWNER][:[GROUP]] FILE...
chown [OPTION]... --reference=RFILE FILE...
DESCRIPTION
This manual page documents the GNU version of chown. chown changes the user and/or
group ownership of each given file. If only an owner (a user name or numeric user ID)
is given, that user is made the owner of each given file, and the files’ group is not
changed. If the owner is followed by a colon and a group name (or numeric group ID),
with no spaces between them, the group ownership of the files is changed as well. If a
colon but no group name follows the user name, that user is made the owner of the files
and the group of the files is changed to that user’s login group. If the colon and
group are given, but the owner is omitted, only the group of the files is changed; in
this case, chown performs the same function as chgrp. If only a colon is given, or if
the entire operand is empty, neither the owner nor the group is changed.
OPTIONS
Change the owner and/or group of each FILE to OWNER and/or GROUP. With --reference,
change the owner and group of each FILE to those of RFILE.
-c, --changes
like verbose but report only when a change is made
--dereference
affect the referent of each symbolic link, rather than the symbolic link itself
(this is the default)
-h, --no-dereference
affect each symbolic link instead of any referenced file (useful only on systems
that can change the ownership of a symlink)
--from=CURRENT_OWNER:CURRENT_GROUP
change the owner and/or group of each file only if its current owner and/or
group match those specified here. Either may be omitted, in which case a match
CHOWN(1)
УдалитьNAME
chown - change file owner and group
SYNOPSIS
chown [OPTION]... [OWNER][:[GROUP]] FILE...
chown [OPTION]... --reference=RFILE FILE...
DESCRIPTION
This manual page documents the GNU version of chown. chown changes the user and/or
group ownership of each given file. If only an owner (a user name or numeric user ID)
is given, that user is made the owner of each given file, and the files’ group is not
changed. If the owner is followed by a colon and a group name (or numeric group ID),
with no spaces between them, the group ownership of the files is changed as well. If a
colon but no group name follows the user name, that user is made the owner of the files
and the group of the files is changed to that user’s login group. If the colon and
group are given, but the owner is omitted, only the group of the files is changed; in
this case, chown performs the same function as chgrp. If only a colon is given, or if
the entire operand is empty, neither the owner nor the group is changed.
OPTIONS
Change the owner and/or group of each FILE to OWNER and/or GROUP. With --reference,
change the owner and group of each FILE to those of RFILE.
-c, --changes
like verbose but report only when a change is made
--dereference
affect the referent of each symbolic link, rather than the symbolic link itself
(this is the default)
-h, --no-dereference
affect each symbolic link instead of any referenced file (useful only on systems
that can change the ownership of a symlink)
--from=CURRENT_OWNER:CURRENT_GROUP
change the owner and/or group of each file only if its current owner and/or
group match those specified here. Either may be omitted, in which case a match
man chmod
ОтветитьУдалить- change file access permissions
SYNOPSIS
chmod [OPTION]... MODE[,MODE]... FILE...
chmod [OPTION]... OCTAL-MODE FILE...
chmod [OPTION]... --reference=RFILE FILE...
DESCRIPTION
This manual page documents the GNU version of chmod. chmod changes the permissions of
each given file according to mode, which can be either a symbolic representation of
changes to make, or an octal number representing the bit pattern for the new permis-
sions.
The format of a symbolic mode is ‘[ugoa...][[+-=][rwxXstugo...]...][,...]’. Multiple
symbolic operations can be given, separated by commas.
A combination of the letters ‘ugoa’ controls which users’ access to the file will be
changed: the user who owns it (u), other users in the file’s group (g), other users not
in the file’s group (o), or all users (a). If none of these are given, the effect is
as if ‘a’ were given, but bits that are set in the umask are not affected.
The operator ‘+’ causes the permissions selected to be added to the existing permis-
sions of each file; ‘-’ causes them to be removed; and ‘=’ causes them to be the only
permissions that the file has.
The letters ‘rwxXstugo’ select the new permissions for the affected users: read (r),
write (w), execute (or access for directories) (x), execute only if the file is a
directory or already has execute permission for some user (X), set user or group ID on
execution (s), sticky (t), the permissions granted to the user who owns the file (u),
the permissions granted to other users who are members of the file’s group (g), and the
permissions granted to users that are in neither of the two preceding categories (o).
A numeric mode is from one to four octal digits (0-7), derived by adding up the bits
with values 4, 2, and 1. Any omitted digits are assumed to be leading zeros. The
first digit selects the set user ID (4) and set group ID (2) and sticky (1) attributes.
The second digit selects permissions for the user who owns the file: read (4), write
chmod never changes the permissions of symbolic links; the chmod system call cannot
Удалитьchange their permissions. This is not a problem since the permissions of symbolic
links are never used. However, for each symbolic link listed on the command line,
chmod changes the permissions of the pointed-to file. In contrast, chmod ignores sym-
bolic links encountered during recursive directory traversals.
STICKY FILES
On older Unix systems, the sticky bit caused executable files to be hoarded in swap
space. This feature is not useful on modern VM systems, and the Linux kernel ignores
the sticky bit on files. Other kernels may use the sticky bit on files for system-
defined purposes. On some systems, only the superuser can set the sticky bit on files.
STICKY DIRECTORIES
When the sticky bit is set on a directory, files in that directory may be unlinked or
renamed only by root or their owner. Without the sticky bit, anyone able to write to
the directory can delete or rename files. The sticky bit is commonly found on directo-
ries, such as /tmp, that are world-writable.
OPTIONS
Change the mode of each FILE to MODE.
-c, --changes
like verbose but report only when a change is made
--no-preserve-root
do not treat ‘/’ specially (the default)
--preserve-root
fail to operate recursively on ‘/’
-f, --silent, --quiet
suppress most error messages
-v, --verbose
output a diagnostic for every file processed
--reference=RFILE
use RFILE’s mode instead of MODE values
chmod never changes the permissions of symbolic links; the chmod system call cannot
Удалитьchange their permissions. This is not a problem since the permissions of symbolic
links are never used. However, for each symbolic link listed on the command line,
chmod changes the permissions of the pointed-to file. In contrast, chmod ignores sym-
bolic links encountered during recursive directory traversals.
STICKY FILES
On older Unix systems, the sticky bit caused executable files to be hoarded in swap
space. This feature is not useful on modern VM systems, and the Linux kernel ignores
the sticky bit on files. Other kernels may use the sticky bit on files for system-
defined purposes. On some systems, only the superuser can set the sticky bit on files.
STICKY DIRECTORIES
When the sticky bit is set on a directory, files in that directory may be unlinked or
renamed only by root or their owner. Without the sticky bit, anyone able to write to
the directory can delete or rename files. The sticky bit is commonly found on directo-
ries, such as /tmp, that are world-writable.
OPTIONS
Change the mode of each FILE to MODE.
-c, --changes
like verbose but report only when a change is made
--no-preserve-root
do not treat ‘/’ specially (the default)
--preserve-root
fail to operate recursively on ‘/’
-f, --silent, --quiet
suppress most error messages
-v, --verbose
output a diagnostic for every file processed
--reference=RFILE
use RFILE’s mode instead of MODE values
[root@localhost ~]# getsebool -a
ОтветитьУдалитьNetworkManager_disable_trans --> off
aisexec_disable_trans --> off
allow_aisexec_rw_tmpfs --> off
allow_console_login --> off
allow_cvs_read_shadow --> off
allow_daemons_dump_core --> on
allow_daemons_use_tty --> on
allow_domain_fd_use --> on
allow_execheap --> off
allow_execmem --> on
allow_execmod --> off
allow_execstack --> on
allow_ftpd_anon_write --> off
allow_ftpd_full_access --> off
allow_ftpd_use_cifs --> off
allow_ftpd_use_nfs --> off
allow_gpg_execstack --> off
allow_gssd_read_tmp --> on
allow_httpd_anon_write --> off
allow_httpd_bugzilla_script_anon_write --> off
allow_httpd_cvs_script_anon_write --> off
allow_httpd_mod_auth_pam --> off
allow_httpd_nagios_script_anon_write --> off
allow_httpd_prewikka_script_anon_write --> off
allow_httpd_squid_script_anon_write --> off
allow_httpd_sys_script_anon_write --> off
allow_java_execstack --> off
allow_kerberos --> on
allow_mount_anyfile --> off
allow_mounton_anydir --> on
allow_mplayer_execstack --> off
allow_nfsd_anon_write --> off
allow_polyinstantiation --> off
allow_postfix_local_write_mail_spool --> off
allow_ptrace --> off
allow_rsync_anon_write --> off
allow_saslauthd_read_shadow --> off
allow_smbd_anon_write --> off
allow_ssh_keysign --> off
allow_tftp_anon_write --> off
allow_unconfined_execmem_dyntrans --> off
allow_unconfined_mmap_low --> on
allow_unlabeled_packets --> on
allow_user_mysql_connect --> off
allow_write_xshm --> off
allow_ypbind --> off
allow_zebra_write_config --> on
amanda_disable_trans --> off
amavis_disable_trans --> off
apmd_disable_trans --> off
arpwatch_disable_trans --> off
auditd_disable_trans --> off
automount_disable_trans --> off
avahi_disable_trans --> off
bluetooth_disable_trans --> off
canna_disable_trans --> off
cardmgr_disable_trans --> off
ccs_disable_trans --> off
cdrecord_read_content --> off
clamd_disable_trans --> off
clamscan_disable_trans --> off
clogd_disable_trans --> off
clvmd_disable_trans --> off
comsat_disable_trans --> off
cron_can_relabel --> off
crond_disable_trans --> off
cupsd_config_disable_trans --> off
cupsd_disable_trans --> off
cupsd_lpd_disable_trans --> off
cvs_disable_trans --> off
cyrus_disable_trans --> off
dbskkd_disable_trans --> off
dccd_disable_trans --> off
dccifd_disable_trans --> off
dccm_disable_trans --> off
dhcpc_disable_trans --> off
dhcpc_exec_iptables --> off
dhcpd_disable_trans --> off
disable_evolution_trans --> off
disable_games_trans --> off
disable_mozilla_trans --> off
disable_thunderbird_trans --> off
dkim_milter_disable_trans --> off
dlm_controld_disable_trans --> off
dnsmasq_disable_trans --> off
dovecot_disable_trans --> off
fcron_crond --> off
fenced_can_network_connect --> off
fenced_disable_trans --> off
fetchmail_disable_trans --> off
fingerd_disable_trans --> off
freshclam_disable_trans --> off
fsdaemon_disable_trans --> off
ftp_home_dir --> off
ftpd_connect_db --> off
ftpd_disable_trans --> off
ftpd_is_daemon --> on
gfs_controld_disable_trans --> off
global_ssp --> off
gpm_disable_trans --> off
greylist_milter_disable_trans --> off
groupd_disable_trans --> off
gssd_disable_trans --> off
hald_disable_trans --> off
hotplug_disable_trans --> off
howl_disable_trans --> off
hplip_disable_trans --> off
httpd_builtin_scripting --> on
httpd_can_network_connect --> off
httpd_can_network_connect_db --> off
httpd_can_network_relay --> off
httpd_can_sendmail --> on
httpd_disable_trans --> off
httpd_enable_cgi --> on
httpd_enable_ftp_server --> off
httpd_enable_homedirs --> on
Удалитьhttpd_execmem --> off
httpd_read_user_content --> off
httpd_rotatelogs_disable_trans --> off
httpd_setrlimit --> off
httpd_ssi_exec --> off
httpd_suexec_disable_trans --> off
httpd_tty_comm --> on
httpd_unified --> on
httpd_use_cifs --> off
httpd_use_nfs --> off
inetd_child_disable_trans --> off
inetd_disable_trans --> off
innd_disable_trans --> off
ipsec_disable_trans --> off
irqbalance_disable_trans --> off
iscsid_disable_trans --> off
kadmind_disable_trans --> off
klogd_disable_trans --> off
kpropd_disable_trans --> off
krb5kdc_disable_trans --> off
ktalkd_disable_trans --> off
lpd_disable_trans --> off
mail_read_content --> off
mailman_mail_disable_trans --> off
mdadm_disable_trans --> off
mozilla_read_content --> off
mysqld_disable_trans --> off
nagios_disable_trans --> off
named_disable_trans --> off
named_write_master_zones --> off
nfs_export_all_ro --> on
nfs_export_all_rw --> on
nfsd_disable_trans --> off
nmbd_disable_trans --> off
nrpe_disable_trans --> off
nscd_disable_trans --> off
ntpd_disable_trans --> off
oddjob_disable_trans --> off
oddjob_mkhomedir_disable_trans --> off
openvpn_disable_trans --> off
openvpn_enable_homedirs --> off
pcscd_disable_trans --> off
pegasus_disable_trans --> off
piranha_fos_disable_trans --> off
piranha_lvs_can_network_connect --> off
piranha_lvs_disable_trans --> off
piranha_pulse_disable_trans --> off
piranha_web_disable_trans --> off
pki_ca_disable_trans --> off
pki_kra_disable_trans --> off
pki_ocsp_disable_trans --> off
pki_ra_disable_trans --> off
pki_tks_disable_trans --> off
pki_tps_disable_trans --> off
portmap_disable_trans --> off
postfix_disable_trans --> off
postgresql_disable_trans --> off
postgrey_disable_trans --> off
pppd_can_insmod --> off
pppd_disable_trans --> off
pppd_for_user --> off
pptp_disable_trans --> off
prelude_audisp_disable_trans --> off
prelude_disable_trans --> off
prelude_lml_disable_trans --> off
privoxy_connect_any --> off
privoxy_disable_trans --> off
ptal_disable_trans --> off
pyzord_disable_trans --> off
qdiskd_disable_trans --> off
qemu_full_network --> on
qemu_use_cifs --> on
qemu_use_comm --> off
qemu_use_nfs --> on
qemu_use_usb --> on
racoon_disable_trans --> off
racoon_read_shadow --> off
radiusd_disable_trans --> off
radvd_disable_trans --> off
rdisc_disable_trans --> off
read_default_t --> on
read_untrusted_content --> off
Удалитьreadahead_disable_trans --> off
regex_milter_disable_trans --> off
restorecond_disable_trans --> off
rgmanager_can_network_connect --> off
rgmanager_disable_trans --> off
rhgb_disable_trans --> off
rhsmcertd_disable_trans --> off
ricci_disable_trans --> off
ricci_modclusterd_disable_trans --> off
rlogind_disable_trans --> off
rpcd_disable_trans --> off
rshd_disable_trans --> off
rsync_client --> off
rsync_disable_trans --> off
rsync_export_all_ro --> off
run_ssh_inetd --> off
samba_domain_controller --> off
samba_enable_home_dirs --> off
samba_export_all_ro --> off
samba_export_all_rw --> off
samba_share_fusefs --> off
samba_share_nfs --> off
saslauthd_disable_trans --> off
secure_mode_insmod --> off
secure_mode_policyload --> off
setrans_disable_trans --> off
setroubleshootd_disable_trans --> off
slapd_disable_trans --> off
smbd_disable_trans --> off
snmpd_disable_trans --> off
spamass_milter_disable_trans --> off
spamassassin_can_network --> off
spamd_disable_trans --> off
spamd_enable_home_dirs --> on
squid_connect_any --> off
squid_disable_trans --> off
ssh_sysadm_login --> off
sssd_disable_trans --> off
staff_read_sysadm_file --> off
stunnel_disable_trans --> off
stunnel_is_daemon --> off
swat_disable_trans --> off
syslogd_disable_trans --> off
tcpd_disable_trans --> off
telnetd_disable_trans --> off
tftpd_disable_trans --> off
tzdata_disable_trans --> off
udev_disable_trans --> off
use_lpd_server --> off
use_nfs_home_dirs --> off
use_samba_home_dirs --> off
user_direct_mouse --> off
user_dmesg --> off
user_net_control --> off
user_ping --> on
user_rw_noexattrfile --> off
user_tcp_server --> off
user_ttyfile_stat --> off
uucpd_disable_trans --> off
vhostmd_disable_trans --> off
virt_use_comm --> off
virt_use_fusefs --> off
virt_use_nfs --> off
virt_use_samba --> off
virt_use_sysfs --> off
virt_use_usb --> on
virtd_disable_trans --> off
winbind_disable_trans --> off
write_untrusted_content --> off
xdm_disable_trans --> off
xdm_sysadm_login --> off
xend_disable_trans --> off
xfs_disable_trans --> off
xm_disable_trans --> off
ypbind_disable_trans --> off
yppasswdd_disable_trans --> off
ypserv_disable_trans --> off
ypxfr_disable_trans --> off
zarafa_deliver_disable_trans --> off
zarafa_gateway_disable_trans --> off
zarafa_ical_disable_trans --> off
zarafa_indexer_disable_trans --> off
zarafa_monitor_disable_trans --> off
zarafa_server_disable_trans --> off
zarafa_spooler_disable_trans --> off
zebra_disable_trans --> off
[root@localhost ~]# sestatus
ОтветитьУдалитьSELinux status: enabled
SELinuxfs mount: /selinux
Current mode: enforcing
Mode from config file: enforcing
Policy version: 21
Policy from config file: targeted
Пример отсюда http://centos.name/?page/tipsandtricks/SelinuxBooleans
ОтветитьУдалитьПример: SELinux не позволит вашему httpd демону взаимодействовать с LDAP сервером на той же машине. Вы должны иметь возможность аутентифицироваться на LDAP. Вы знаете, что интересующие вас политики содержат слово httpd.
[root@localhost ~]# getsebool -a | grep httpd
allow_httpd_anon_write --> off
allow_httpd_bugzilla_script_anon_write --> off
allow_httpd_cvs_script_anon_write --> off
allow_httpd_mod_auth_pam --> off
allow_httpd_nagios_script_anon_write --> off
allow_httpd_prewikka_script_anon_write --> off
allow_httpd_squid_script_anon_write --> off
allow_httpd_sys_script_anon_write --> off
httpd_builtin_scripting --> on
httpd_can_network_connect --> off
httpd_can_network_connect_db --> off
httpd_can_network_relay --> off
httpd_can_sendmail --> on
httpd_disable_trans --> off
httpd_enable_cgi --> on
httpd_enable_ftp_server --> off
httpd_enable_homedirs --> on
httpd_execmem --> off
httpd_read_user_content --> off
httpd_rotatelogs_disable_trans --> off
httpd_setrlimit --> off
httpd_ssi_exec --> off
httpd_suexec_disable_trans --> off
httpd_tty_comm --> on
httpd_unified --> on
httpd_use_cifs --> off
httpd_use_nfs --> off
вот листинг папки var/wwww/html
ОтветитьУдалитьпапка commons отличается от остальных только :user_home_t
[root@localhost html]# ls -Z
drwxr-xr-x 6226 6226 root:object_r:user_home_t commons
drwxr-xr-x 6226 6226 root:object_r:httpd_sys_content_t drupal-7.9
drwxrwxr-x 504 502 root:object_r:httpd_sys_content_t op6
drwxr-xr-x 6226 6226 root:object_r:httpd_sys_content_t op622
drwxr-xr-x 6226 6226 root:object_r:httpd_sys_content_t openpublish79
drwxr-xr-x root root root:object_r:httpd_sys_content_t tattler
-rwxr-xr-x root root root:object_r:httpd_sys_content_t test.php
-rw------- root root root:object_r:httpd_sys_content_t test.php~
-rw-r--r-- root root user_u:object_r:httpd_sys_content_t touch
ls
ОтветитьУдалитьSELinux options:
--lcontext Display security context. Enable -l. Lines
will probably be too wide for most displays.
-Z, --context Display security context so it fits on most
displays. Displays only mode, user, group,
security context and file name.
--scontext Display only security context and file name.
--help display this help and exit
--version output version information and exit
После прочтения http://docs.fedoraproject.org/ru-RU/Fedora/13/html/Security-Enhanced_Linux/sect-Security-Enhanced_Linux-Working_with_SELinux-SELinux_Contexts_Labeling_Files.html
ОтветитьУдалитьВыполнил комманду изменения контекста:
[root@localhost html]# chcon -R -t httpd_sys_content_t commons
[root@localhost html]# ls -Z
drwxr-xr-x 6226 6226 root:object_r:httpd_sys_content_t commons
drwxr-xr-x 6226 6226 root:object_r:httpd_sys_content_t drupal-7.9
drwxrwxr-x 504 502 root:object_r:httpd_sys_content_t op6
После выполнени команды мой браузер сразу (без рестарта httpd) перестал выдавать 403 ошибку (на этой странице) и вывел меня на страницу
Удалитьhttp://localhost/commons/install.php?profile=commons
Но проблема вроде бы не решена, поскольку надо разобраться временно ли удалось переключить контекст (как написано в docs.fedoraproject.org)
"Команда chcon вносит изменения в контекст SELinux для файлов. Однако, изменения, вносимые с помощью команды chcon не сохраняются после перемаркирования файловой системы или выполнения команды /sbin/restorecon."
Подробнее о SELinux можно прочитать http://wiki.centos.org/HowTos/SELinux
Удалитьна английском.
Надо бы знать структуру файлов и папок, команды
Все здесь есть...
Вот опять я попададю на ошибку 403 (у вас нет доступа)
ОтветитьУдалитьДогадываюсь, что дело в SelinusНахожу этот пост... тупо повторяю последнюю комманду, потом догадываюсь, что надо поменять
"commons" на "opigno"
[root@localhost html]# chcon -R -t httpd_sys_content_t opigno
После этого я получил доступ не сразу... ??? , набрал
https://localhost/opigno/
Потом обновил вид в браузере..., не понимаю, почему, но
Строка
https://localhost/opigno/install.php?profile=opigno_lms&locale=en
высветилась не сразу...
Разобрался. Для смнеы разрешений использовал влкакдку Properties контекстного меню Nautilus...
УдалитьТам есть мпана разрешений и владельцев для папок и для файлов отдельно. Я впопыхах менял для файлов... а не для папок...